3W Epistar LEDs 18W Mini LED Light Bar

Model NO.: TH-GT0518E-L
Power Output: 18 Watts
LEDs: 6PCS*3W Epistar
Lumen: 1200lm
Optional Beam: Spot/Flood
Optional Bracket: Long or Short Side-Mounting Brackets
Len Materia: Polycarboante Lens
Materia: Diecast Aluminum Housing, Alum Alloy Bracket
Waterproof Rate: IP68
Length Size: 8"/19.3cm
Trademark: Teehon
Transport Package: One Piece in One Box, Thirty Boxes in One Carton
Specification: Carton size: 49*43*24cm
Origin: Guangzhou China
HS Code: 8512201000
Model NO.: TH-GT0518E-L
Power Output: 18 Watts
LEDs: 6PCS*3W Epistar
Lumen: 1200lm
Optional Beam: Spot/Flood
Optional Bracket: Long or Short Side-Mounting Brackets
Len Materia: Polycarboante Lens
Materia: Diecast Aluminum Housing, Alum Alloy Bracket
Waterproof Rate: IP68
Length Size: 8"/19.3cm
Trademark: Teehon
Transport Package: One Piece in One Box, Thirty Boxes in One Carton
Specification: Carton size: 49*43*24cm
Origin: Guangzhou China
HS Code: 8512201000
3W Epistar Leds 18W Mini LED Light Bar

Offroad Bar Advantages:
1. DC 9~60V ultra-wide operating voltage, applies to various vehicles;
2. Concise & mature designed circuit board ensures high quality;
3. 0.2% extreme low defective rate,due to the adoption of Korean components;
4. 
Slim designed housing
5. Long/short side-mounting brackets for option
6. With 4D optical lens


The Specification of Straight led:
ITEM DESCRIPTION
Model Number TH-GT0518E-L
Power Output 18 Watts
Operating Voltage DC9~60V
LED Chip 6pcs*3W  Epistar
Lumens 1200lm
Color Temperature:  6000K
Waterproof rating IP68
Optional Beam Pattern  Spot/flood
Housing Material Diecast aluminum housing
Mounting Bracket alum alloy bracket
Optional Bracket Long/short side-mounting brackets
Len Materia polycarboante lens,With 4D optical lens
Housing item Straight Single-Row designed
Length Size 8"/19.3cm
Life Span Above 30,000 hours 
Wire Length 60cm
Warranty 12 months

high power led light bar Qualifications:

3W Epistar LEDs 18W Mini LED Light Bar

car roof led lights G 4D Series Size:
Model Length Size Power LED Type LED Quantity Lumens Beam
TH-GT0518E-L 8"/19.3cm 18W 3W Epistar 6pcs 1200lm Spot/Flood
TH-GT0530E-L 12"/29.3cm 30W 3W Epistar 10pcs 2000lm Spot/Flood/Combo
TH-GT0536E-L 14"/34.8cm 36W 3W Epistar 12pcs 2400lm Spot/Flood/Combo
TH-GT0560E-L 21"/53.6cm 60W 3W Epistar 20pcs 4000lm Spot/Flood/Combo
TH-GT0572E-L 25"/64.5cm 72W 3W Epistar 24pcs 4800lm Spot/Flood/Combo
TH-GT0590E-L 31"/79.4cm 90W 3W Epistar 30pcs 6000lm Spot/Flood/Combo
TH-GT05120E-L 41"/104.8cm 120W 3W Epistar 40pcs 8000lm Spot/Flood/Combo
TH-GT05150E-L 51"/130.2cm 150W 3W Epistar 50pcs 10000lm Spot/Flood/Combo

top light bar Detail Image:
3W Epistar LEDs 18W Mini LED Light Bar


3W Epistar LEDs 18W Mini LED Light Bar

single row led lightbar Application:
3W Epistar LEDs 18W Mini LED Light Bar
Company and Factory:
Established in 2008,Teehon has been dedicated in the research, development and manufacturing of 4x4 led lightbar, LED Work Light and LED headlight. Our factory own 7 production lines : 1 LED packaging line, 2 SMT production lines and 4 LED light production lines. The cost is controlled accurately and the quality is guaranteed.
 3W Epistar LEDs 18W Mini LED Light Bar


Production Facilities:
Name No. Name No.
(Fuji, Panasonic, Casio) SMT machines 4 pressure testers 3
hot air-reflow systems 2 UV-VIS-Near IR Spectro photo colorimeter    2
wire peeling machines 4 LCR Digital Electric Bridges 3
laser carving machines 2 Oscilloscopes 5
automatic wire peeling machines 2 integrating sphere 1
3W Epistar LEDs 18W Mini LED Light Bar
Size and Package Offroad Bar:
Name piece G.W Size
One piece 1pcs 0.84kgs 23*20*11CM
One carton 30pcs/ctn 25.1kgs 49*43*24CM
 
Shipping for Straight led:
Sample order Shipping by express like DHL, FEDEX, TNT, EMS about 3-5days
Bulk order Shipping by sea about 7-15days
 
Why choose us:
1.Provide complete ODM&OEM solutions, which include LEDs producing, circuit board designing & producing, as well as housing designing  
2.Strong R&D capabilities: to develop a new product costs only 30 days, we release at least 2 new products each month.   
3.Powerful production strength: we can produce 15,000pcs high power led light bar & 90,000pcs Rohs Ce LED Work Lights each month.   
4.Extraordinary quality & cost control ability: we are the only auto LED light manufacturer who makes the light from beginning to end, the defective rate of product is lower to 0.2%.
 The LEDs will be lighten up for 6 times before delivery, and each light will be tested strictly under water according to IP68 waterproof standard.   
  A modern factory: owns a high-class LED encapsulation laboratory, and 5 high speed full automatic SMT machines, the whole factory is equipped with over 30   advanced producing & testing facilities  
  

FAQ:

Q: What's your car roof led lights after-sales service and warranty?
A: We promise to bear the following responsibility when defective product is found:
1.12 months warranty from the first day of receiving goods;
2. Replacements would be sent with goods of your next order;
3. Refund for defective products if customers require.
 
Q: Do you accept ODM&OEM top light bar orders?
A: Yes, we provide ODM&OEM services to worldwide customers, we are able to customize housings in different styles, and LED bulbs in different brands, we also customize circuit board & packaging box as per your requirements.
 
Q: How to work with you on ODM&OEM single row led lightbar orders?
A: There are three forms of cooperation for choice:
1.Housing customization: we need to negotiate the cost of development and reach an agreement before starting the cooperation;
2.Various colors of housing customization: No extra cost, however the MOQ is 100 pcs;
3.Various colors of LED bulbs customization: MOQ is 10 pcs, meanwhile the price will be increased.
    
Q: What's the 4x4 led lightbar MOQ?
A: MOQ is 10pcs for standardized products; for customized products, MOQ should be negotiated in advance. There is no MOQ for sample orders.
 
Q: How long is Offroad Bar lead time?
A: The lead time for sample orders is 3-5 days, for bulk orders is 5-15 days.
 
Q: How to place Straight led orders?
A: 1. Email us the model, beam pattern and quantity, consignee information, shipping way
and payment terms;
2. Proforma Invoice made and sent to you;
3. Complete Payment after confirming the PI;
4. Confirm Payment and arrange production.

  3W Epistar Leds 18W Mini LED Light Bar

Offroad Bar Advantages:
1. DC 9~60V ultra-wide operating voltage, applies to various vehicles;
2. Concise & mature designed circuit board ensures high quality;
3. 0.2% extreme low defective rate,due to the adoption of Korean components;
4. 
Slim designed housing
5. Long/short side-mounting brackets for option
6. With 4D optical lens


The Specification of Straight led:
ITEM DESCRIPTION
Model Number TH-GT0518E-L
Power Output 18 Watts
Operating Voltage DC9~60V
LED Chip 6pcs*3W  Epistar
Lumens 1200lm
Color Temperature:  6000K
Waterproof rating IP68
Optional Beam Pattern  Spot/flood
Housing Material Diecast aluminum housing
Mounting Bracket alum alloy bracket
Optional Bracket Long/short side-mounting brackets
Len Materia polycarboante lens,With 4D optical lens
Housing item Straight Single-Row designed
Length Size 8"/19.3cm
Life Span Above 30,000 hours 
Wire Length 60cm
Warranty 12 months

high power led light bar Qualifications:

3W Epistar LEDs 18W Mini LED Light Bar

car roof led lights G 4D Series Size:
Model Length Size Power LED Type LED Quantity Lumens Beam
TH-GT0518E-L 8"/19.3cm 18W 3W Epistar 6pcs 1200lm Spot/Flood
TH-GT0530E-L 12"/29.3cm 30W 3W Epistar 10pcs 2000lm Spot/Flood/Combo
TH-GT0536E-L 14"/34.8cm 36W 3W Epistar 12pcs 2400lm Spot/Flood/Combo
TH-GT0560E-L 21"/53.6cm 60W 3W Epistar 20pcs 4000lm Spot/Flood/Combo
TH-GT0572E-L 25"/64.5cm 72W 3W Epistar 24pcs 4800lm Spot/Flood/Combo
TH-GT0590E-L 31"/79.4cm 90W 3W Epistar 30pcs 6000lm Spot/Flood/Combo
TH-GT05120E-L 41"/104.8cm 120W 3W Epistar 40pcs 8000lm Spot/Flood/Combo
TH-GT05150E-L 51"/130.2cm 150W 3W Epistar 50pcs 10000lm Spot/Flood/Combo

top light bar Detail Image:
3W Epistar LEDs 18W Mini LED Light Bar


3W Epistar LEDs 18W Mini LED Light Bar

single row led lightbar Application:
3W Epistar LEDs 18W Mini LED Light Bar
Company and Factory:
Established in 2008,Teehon has been dedicated in the research, development and manufacturing of 4x4 led lightbar, LED Work Light and LED headlight. Our factory own 7 production lines : 1 LED packaging line, 2 SMT production lines and 4 LED light production lines. The cost is controlled accurately and the quality is guaranteed.
 3W Epistar LEDs 18W Mini LED Light Bar


Production Facilities:
Name No. Name No.
(Fuji, Panasonic, Casio) SMT machines 4 pressure testers 3
hot air-reflow systems 2 UV-VIS-Near IR Spectro photo colorimeter    2
wire peeling machines 4 LCR Digital Electric Bridges 3
laser carving machines 2 Oscilloscopes 5
automatic wire peeling machines 2 integrating sphere 1
3W Epistar LEDs 18W Mini LED Light Bar
Size and Package Offroad Bar:
Name piece G.W Size
One piece 1pcs 0.84kgs 23*20*11CM
One carton 30pcs/ctn 25.1kgs 49*43*24CM
 
Shipping for Straight led:
Sample order Shipping by express like DHL, FEDEX, TNT, EMS about 3-5days
Bulk order Shipping by sea about 7-15days
 
Why choose us:
1.Provide complete ODM&OEM solutions, which include LEDs producing, circuit board designing & producing, as well as housing designing  
2.Strong R&D capabilities: to develop a new product costs only 30 days, we release at least 2 new products each month.   
3.Powerful production strength: we can produce 15,000pcs high power led light bar & 90,000pcs Rohs Ce LED Work Lights each month.   
4.Extraordinary quality & cost control ability: we are the only auto LED light manufacturer who makes the light from beginning to end, the defective rate of product is lower to 0.2%.
 The LEDs will be lighten up for 6 times before delivery, and each light will be tested strictly under water according to IP68 waterproof standard.   
  A modern factory: owns a high-class LED encapsulation laboratory, and 5 high speed full automatic SMT machines, the whole factory is equipped with over 30   advanced producing & testing facilities  
  

FAQ:

Q: What's your car roof led lights after-sales service and warranty?
A: We promise to bear the following responsibility when defective product is found:
1.12 months warranty from the first day of receiving goods;
2. Replacements would be sent with goods of your next order;
3. Refund for defective products if customers require.
 
Q: Do you accept ODM&OEM top light bar orders?
A: Yes, we provide ODM&OEM services to worldwide customers, we are able to customize housings in different styles, and LED bulbs in different brands, we also customize circuit board & packaging box as per your requirements.
 
Q: How to work with you on ODM&OEM single row led lightbar orders?
A: There are three forms of cooperation for choice:
1.Housing customization: we need to negotiate the cost of development and reach an agreement before starting the cooperation;
2.Various colors of housing customization: No extra cost, however the MOQ is 100 pcs;
3.Various colors of LED bulbs customization: MOQ is 10 pcs, meanwhile the price will be increased.
    
Q: What's the 4x4 led lightbar MOQ?
A: MOQ is 10pcs for standardized products; for customized products, MOQ should be negotiated in advance. There is no MOQ for sample orders.
 
Q: How long is Offroad Bar lead time?
A: The lead time for sample orders is 3-5 days, for bulk orders is 5-15 days.
 
Q: How to place Straight led orders?
A: 1. Email us the model, beam pattern and quantity, consignee information, shipping way
and payment terms;
2. Proforma Invoice made and sent to you;
3. Complete Payment after confirming the PI;
4. Confirm Payment and arrange production.

 

Rebar Diameter 10-32mm Vertical Rebar Bending Machine Steel Bar Bender center
The CNC Double-heard Rebar Bender center adopts digital control. Its features simple operation, convenient maintenance and high efficiency . It can realize automatic length measurement, automatic bending clamp, rapid prototyping and other functions. The control program of imported PLC and CNC stores hundreds of figures and is equipped with database. It applies advanced designing concept and adopts imported servo motor driving and controlling. Therefore, it realizes two-way digital control bending and accomplishes more than 20 angles figures. The producing efficiency is high. This equipment especially applies to highway bridge construction site and rebar concentrated processing factory.

Steel Bending Center

Wire Bending Machine Cnc,Cnc Bending Machine Programming,Cnc Profile Bending Machine,Cnc Vertical Double Bender

Shandong Luteng Building Equipment Co., Ltd. , https://www.lutengmachinery.com

Posted on